The video is good but incomplete, setting the stone is a bit tricky, make sure you get the stone tight. It's not quite as easy as it looks. The ring band itself should be wrapped to make it more sturdy, in my opinion.
Materials and Tools:
(My advise is to start out with copper or brass practice wire until you get the hang of it!)
3 ft. 22-gauge 14K/20 gold-filled 1/2-hard square wire
2 ft. 21-gauge 14K/20 gold-filled 1/2-round 1/2-hard wire
1 ring cab (1/2" wide x 1" long) [You can use any size, the smaller the stone, the harder the setting process]
ruler with millimeters
permanent marking pen
ring mandrel
pin vise
flush cutters
flat nose pliers
fine-blade knife
Chain maille: You have some choices; I've posted free tutorials on the right side bar. You can buy tutorials at JewelryLessons.com, bless them for trying to make a buck with copywritten designs they sell, or you can go to the chain maille organization and get TONS of instructions on all kinds of patterns, techniques and so on all for free.
The newbies jewelry designers/artist coming on board everyday should really do some research on "how to's" for free before you jump into buying tutorials that actually have been copied from magazines and other free tuorials posted all over the web.
Wire wrapping: for the most part you can find easy to follow instructions all over the place if you are new to the craze. More advanced wire wrappers can look at something and duplicate it. Good Luck and above all learn something new everyday.
If you want to have a really nice look to the wire wrapped briolette thread tiny beads on either side of the briolette. Why because the wire, usually very thin has a tendency to get out of shape. In other words it is ugly. Then after you connect the two wires by wrapping, put another tiny bead on the wire before you make your top loop. The reason is that the bottom wrap and the top wrap show way too much wire showing. The tiny bead will take the eye away from all of those wraps.
Briolettes can be tricky, start out using copper wire before you dive in to wrapping something to sell. Practice, practice, practice to make it near to perfect. And please, don't use the excuse "its hand made" for sloppy work.
This technique is duly noted in many "high-end" jewelry designer pieces. Kick it up a notch, go the extra mile and make your jewelry something better. Can't figure out why your jewelry isn't selling?
This video is good for learning the technique. The finished product is unacceptable for excellent craftsmanship.
This tutorial shows you how to use Cindy's Braider: Wire Weaving Kit. This innovative kit contains everything you need, except the wire itself, to make wire woven rings, bracelets and more!
Make the 4 in 1 pattern and knit small pieces together.
Get ready for a chuckle, check out the pliers. This particular video, for me, was understandable, crude, but understandable, LOL. I have a hard time with written directions and confusing still picture examples, this video seems to get through my grey matter. Hope it helps you all.
Not all videos are created equal, this is a good one. My Live and Learn Series.
Chain maille weaves can be difficult to start. This tutorial shows an easy way for the full Persian using two wire ties. The text version with still photographs is here " http://www.beadinggem.com